- 当继电器装入 PCB 板后，如需进行整体清洗，请与我司联系确认，以便提供合适的产品。当不需要整体清洗时， 建议优先选用防焊剂产品；
- 常规产品为黑色外壳，若需其他颜色外壳颜色可特殊定做。
- 客户特殊要求经我司评审后，按特性号的形式标示。
|
触点数据 Contact data |
||||||||||
|
触点形式 Contact Arrangement |
1A(1H) |
|||||||||
|
触点材料 Contact Material |
Ag Alloys |
|||||||||
|
触点负载(阻性) Conatct Rating(Resistive) |
5A 30VDC/5A 250VAC |
|||||||||
|
最大切换功率 Max.Switching Power |
1250VA |
|||||||||
|
最大切换电压 Max.Switching Voltage |
250VAC |
|||||||||
|
最大切换电流 Max.Switching Current |
5A |
|||||||||
|
触点阻性 Contact Resistance |
≤100mΩ （1A24VDC） |
|||||||||
|
寿命 Operation Life |
电气 Electrical |
1×10^5 ops |
||||||||
|
机械 Mechanical |
1×10^7 ops |
|||||||||
|
|
||||||||||
|
线圈参数 Coil Parameter |
||||||||||
|
额定线圈功率 Rated coil power |
标准型：约 450mW |
|||||||||
|
线圈电压Coil voltage VDC |
吸合电压Pick up Voltage VDC |
释放电压Release voltage VDC |
最大电压Max voltage VDC |
额定电流Nominal Current mA |
线圈电阻Coil Resistance |
线圈功耗Coil power consumption W |
||||
|
5 |
75% |
10% |
130% |
91 |
55 |
0.45 |
||||
|
6 |
75 |
80 |
0.45 |
|||||||
|
9 |
50 |
180 |
0.45 |
|||||||
|
12 |
37.5 |
320 |
0.45 |
|||||||
|
24 |
18.8 |
1280 |
0.45 |
|||||||
注意:1,使用的线圈电压低于线圈额定电压时将会损害继电器的工作.
2,吸合,释放电压仅供检测用,不是设计的使用指标.
Caution:1,The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2,Pick up and release voltage are for test purposes only and are not be used as design criteria.
|
技术特性 Operation condition |
|
|
绝缘电阻 Insulation Resistance |
1000MΩ |
|
介质耐压 Dielectric Strength |
|
|
断开触点间 Between Contacts |
1000VAC |
|
触点与线圈间 Between Contacts and Coil |
2500/4000VA |
|
动作时间（额定电压下）Action time (rated voltage) |
≦15ms |
|
释放时间（额定电压下）Release time (rated voltage) |
≦5ms |
|
耐冲击 Shock Resistance |
98m/s2 980m/s2 |
|
抗振性 Vibration Resistance |
10Hz~55Hz 1.5mm 双振幅 Double amplitude 1.5mm |
|
引出端强度 Terminals Strength |
6N |
|
可焊性 Solderability |
280±10℃ 2±1s℃ |
|
环境温度 Ambient Temperature |
‐40~85℃ |
|
相当湿度 Relative Humidity |
5%~85% RH |
|
质(重)量 Mass |
约 7g |
|
备注： |
|
